7 FASTEST SOLUTIONS TO FIX USB DEVICE MALFUNCTIONED AND NOT RECOGNIZED ERROR

Solution 1. Remove and then plug the power supply to fix the USB device malfunctioned error.

Unplug the USB device from the Computer >> Turn off the computer >> Remove the power supply of the computer >> Plug the power supply back to the computer after 20-30 seconds >> Restart the computer >> Plug on the USB device again

Solution 2. Unplug the USB device and reconnect with a computer

Unplug the USB device from the computer >> clean the USB port of the device clamp the position of the USB port and flash chip inside the USB housing >> Reconnect the USB device with a computer

Solution 3. Configure the USB Root Hub

Press WIN X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on USB Root Hub >> Properties >> Power Management >> Check to Allow this computer to turn off this device to save power >> Click Ok >> Plug the USB device again with the computer.

Solution 4. Disable and then enable the Generic USB hub

Press WIN X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on Generic USB hub >> Disable >> After that then click Enable >> Click Ok >> Plug the USB device again with the computer.

Solution 5. Update the USB device driver to fix the last USB device malfunctioned error

Press WIN X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on the USB device’s driver >> Update Driver Software >> After update >> Click Ok >> Plug the USB device again with the computer.

Solution 6. Uninstall the universal serial Bus controller then reinstall

Press WIN X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on the USB device’s driver >> Uninstall >> Reboot the computer>> Plug the USB device again with the computer >> The system will reinstall the driver for you and then fix the last USB device malfunctioned error

Solution 7. Disable USB selective suspend

Press WIN X and then choose Power Option >> Change Plan setting >> Change advanced power setting >> USB settings >> USB selective suspend setting >> Disable On battery and Plugged in >> Save the settings >> Plug the USB device again with the computer

Look here for more about fix USB device malfunctioned and not recognized in Windows with best USB recovery software!

この記事へのコメント